top of page

400 Lt. Hot Dip Galvanized
Waste Contanier

  1. The body is twisted from a single piece of 2.00 mm. thick iron sheet; resistance of the body and sides increased in presser. Side of the body is twisted 1,50 cm. so that it grasps the body from outside; the ground, corners and upper back opening are provided round shape.

  2. Container opening profiles are self-twisted as 25x50 mm. and non welding.Just the mountings of the corners are welded.

  3. The body is welded completely with  gasous welding and without any dross.

  4. The lifting trunnions are 4.00 mm. and they are welded to the body with reinforcement. At sides carrying handles are existed.

  5. The lid is laminated by a single piece of 1,50 mm. thick iron sheet to make it durable and aesthetic.

  6. Opening handles on the lid, locked with osculation, reinforced with resistance increasing profile from inside.

  7. There are 4 carrying rollers, with a size of 150 x 45, two of them are swivel 360º, two of them are fixed and fork sheet is 3.00 mm. Wheels are settled which are suitable to the standars of TS EN 12532.Thickness of the wheel mounting bracket is 3.00 mm.

  8. Container is produced in accordance with technical pictures and technical specialties, galvanized in accordance with the standard of TS  EN ISO 1461 with the system of hot dipping galvanization 60-80 micron.

  9. Container has the certificate of TS EN 840-2.

  10. In the front side; the name of the municipality, a drawing which shows a person throwing garbage and the slogan 'Keep Clean  Our Environment' are applied.

bottom of page